GN Solids Control Equipment,Solids Control System

August 08 2022

GN Solids Control as a world leading mud cleaning system designer and manufacturer has been providing thousands units to HDD contractors. Last month, GN Solids Control shipped one set 240 m3/h HDD mud cleaning system and one set 120 m3/h HDD mud cleaning system.

All GN Solids Control made systems are effectively to be used for solids and liquid separation, and the typical treating equipment includes shaker, cyclone, centrifuge and centrifugal pump etc. In short, GN uses gravity differences of liquid and solids to achieve the goal of get clear water and dry solids.

1.GN 1000 GPM HDD Mud Cleaning System
It mainly includes 2 sets of shale shaker GNZS703F, 1 set of mud cleaner GNZJ703F-2S12N, 22inch rotating bowl centrifuge GNLW554EP-VFD, 4 sets mud tanks and one jet mud mixing unit (composed by jet mud hopper and centrifugal pump).

2.GN 500 GPM HDD Mud Cleaning System
The 500 GPM hdd mud recyler contains similar treating unit such as 2 sets shale shaker GNZS703F, 1 set mud cleaner GNZJ703F-1S8N, 1 set 18 inch bowl decanter centrifuge GNLW452, 2 sets mud tanks and 1 set jut mud mixer.
GN Solids made HDD mud recyclers help drilling contractors save huge cost on the drilling mud as after used clean drilling mud can be reused and more importantly less waste discharge to the nature.

All shaker screens used on GN shale shakers and GN mud cleaners are made by GN Solids Control. GN Solids Control is the only China screen manufacturer who can provide a API RP 13C 3rd party report which can guarantee GN made screens are strictly on the cut point and conductance.

Nowadays, it is a trend that more and more HDD drilling contractors start to use decanter centrifuge to remove finer particles from the drilling mud, as before only shaker or desilter is used which can only remove solids larger than 25 microns. More decanter centrifuges will be used in the HDD industry in the future.

GN NEWS

More>>
 

GN Videos

Latest Products

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mixshields  or Shaft Sinking Machines

  • 9 Inch (220) Decanter Centrifuge – Baby Centrifuge

    The 9 Inch Decanter Centrifuge is a baby centrifuge which is the world smallest industry decanter. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • GN Thermal Desorption Unit (TDU)

    GN Thermal Desorption Unit is an ex-situ, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, oil based drilling cuttings, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons.

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force.

  • Coal Screen Scroll Centrifuge

    GNCD930 Vertical Screen Scroll Centrifuge allows you to handle coal from higher fines recovery and maintaining the lowest product discharge moistures possible. The GNCD930 Coal Screen Scroll Centrifuge is designed for fine coal drying with significantly high capacity per energy unit.

  • Explosion Proof Control Panels

    GN Explosion proof electrical control panels or electrical control stations are used in hazardous Location. The Ex control panel is designed and built to operate in environments where concentrations of flammable gases, vapors, liquids or combustible particles pose risks of ignition and explosion.

  • Explosion Proof Junction Box

    GN Explosion Proof Junction Box is optional in ATEX approval, IEC Ex approval, and CN Ex Approval for Zone 1 or Zone 2, class I division 1 and division 2 hazardous locations.

  • Explosion Proof Motor Starters

    GN Solids Control explosionproof motor startersare rugged and compact complete system and are Europe ATEX and International IEC Ex as well as China National CN Ex certified for use in Zone 1 or Zone 2 areas where motor circuit protection is required.

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps