• USA
    Russia
    China
    First API Certified Solids Control Company from China
  • GN Solids America in Houston

GN Solids Control Equipment,Solids Control System

May 08 2020

GN Solids Control last week shipped another set of Slurry Dewatering Decanter Centrifuge to a Singapore customer, who will use this system in TBM slurry separation. As a turnkey solids and liquid separation equipment provider, GN Solids Control can provide customizes slurry treating system based on customer’s demands. 

Most of GN Solids Control Slurry Treating Systems are provided in oil & gas industry, while GN TBM Slurry Separation Plant is also very popular in TBM, Pipe Jacking or Trenchless construction etc, as a large quantity of mud is occurred after multiple times circulation. It’s very necessary to use GN Slurry Dewatering Unit as those finer solids usually cause increased mud weight and bring larger chance to wear drilling machine.GN Solids Control has provided hundreds of Slurry Dewatering decanter centrifuges in the world, includes USA, Canada, Kuwait, Singapore, Japan, England etc.

Here are the main treating equipment in this GN TBM Slurry Treating System:

1.1000G Mud Recycling System

GN Solids 1000G has the flow rate of 1000 GPM. It is designed in a compact structure includes desander cyclones and double deck shaker. TBM slurry is feed into 10 inch cyclones by using a submersible pump or centrifugal pump, after treated liquid fall into the bottom middle tank. 

2.Decanter Centrifuge

A screw pump sucks the mud from 1000GPM mud recycling system and feed into GN decanter centrifuge. Finer solids around 2-5 microns can be separated out by high speed decanter centrifuge, here one 22 inch bowl centrifuge GNLW553 is used. 

3.Flocculent Dosing Unit

In order to eliminate most of those larger particles, GN flocculent dosing unit is also provided. Flocculent is feed by dosing pump into decanter centrifuge. 

4.Standard Container

Above mentioned GN equipment are all fixed inside standard containers, which are easy to move among different work sites.     

GN Solids Control provides different flow rate systems, all are in a compact structure as they are mainly used in urban area with limited working room.

GN NEWS

More>>
 

GN Videos

Latest Products

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mixshields  or Shaft Sinking Machines

  • 9 Inch (220) Decanter Centrifuge – Baby Centrifuge

    The 9 Inch Decanter Centrifuge is a baby centrifuge which is the world smallest industry decanter. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • GN Thermal Desorption Unit (TDU)

    GN Thermal Desorption Unit is an ex-situ, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, oil based drilling cuttings, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons.

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force.

  • Coal Screen Scroll Centrifuge

    GNCD930 Vertical Screen Scroll Centrifuge allows you to handle coal from higher fines recovery and maintaining the lowest product discharge moistures possible. The GNCD930 Coal Screen Scroll Centrifuge is designed for fine coal drying with significantly high capacity per energy unit.

  • Explosion Proof Control Panels

    GN Explosion proof electrical control panels or electrical control stations are used in hazardous Location. The Ex control panel is designed and built to operate in environments where concentrations of flammable gases, vapors, liquids or combustible particles pose risks of ignition and explosion.

  • Explosion Proof Junction Box

    GN Explosion Proof Junction Box is optional in ATEX approval, IEC Ex approval, and CN Ex Approval for Zone 1 or Zone 2, class I division 1 and division 2 hazardous locations.

  • Explosion Proof Motor Starters

    GN Solids Control explosionproof motor startersare rugged and compact complete system and are Europe ATEX and International IEC Ex as well as China National CN Ex certified for use in Zone 1 or Zone 2 areas where motor circuit protection is required.

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps