decanter centrifuge training
June 19 2016

Get the Training in GN or on your Site

Just in last week, one of our client visit our company for the decanter centrifuge training. They bought one set GNLW452C-VFD variable speed centrifuge for a big horizontal directional drilling project, one 900m gas line pipe project from government. As this is the first time, they try to use centrifuge to treat the drilling mud in better performance, the clients arrange two engineers coming to GN Solids Control headquarter for the training course.

At the same time, another team went to Philippines, doing the commissioning for one gold mining site. Before trying GN equipment, there are several ways they are doing. The most original way is all by manpower, after flocculation, the water overflow, then a few dozen person stay in the mud, connect all of them to the bags, then with handing chain, send to the truck.

While there is also a filter press lying there, broken, not working.

Now they got third choice, with a shaker for first separation, then 2 centrifuges, in series or in parallel, separate the most solids out.

While on the commissioning, we also do the training for the operators on site, guide them to do some real operation by themselves.

As we can see, there are many differences of this two training.

If after the order, the quality, the supplier, the equipment itself is your concern, then you will need some factory / yard survey. A visit & training in the yard, as this client to GN is a good option. While you always need take care of your own backyard.

Then after the equipment went to the site, it is quite different. As normally the guy made a dicisssion to purchase, and the one who operate the equipment is different person. And normally not directly leading or connected.

So the on site training, the real, in person experience on the noise, performance, to feel it before the lab testing report.

For all GN valuable clients, this is optional, welcome to visit GN and have training / visiting in the yard, and all the equipment sold, we have certain commissioning / training service. You can have one, or have both if needed.

Keep tune, and you will know more about us.

May 25 2016

Tenchless Asia 2016, A Good Start for Malaysia

Our main business is oil, petrol and palm. It is a Chinese tricky of pronounce, but it shows the main business in Malaysia, oil gas, especailly offshore. And if the oil price goes down the economic will get slower. The touriest guide in Malaysia told us. While we are attending the Trenchless show, since Malaysia government is caring about the envrionment now, when keep releasing HDD project, TBM project, MRT construction etc., if keep dumping mud as before, descendant will finally bear the result and suffer.

Our first intension is bring one of the economic mus system to the show, and finally changed considering the inconvenience of shipping and booth arrangement, and brought a desilter cleaner which shows the basic parts of a system, mini shaker, cyclones.

Not sure I should be delighted or not, when I heard that rain lucky tank, neither when I heard some TBM machine supplier discussing about dumping everything to the evnironment.

As I always told clients, do not wait until you lose the blue sky, like we do in Beijing now; then you realized envrionmental protection.

A few advantages from GN:

1) Years of experience for customizing solution for HDD, TBM

From we start this company, we learn from clients, customize solution for clients, though finally we develop our own modularized systems based on this experience. We still value all feedback, good ideas from site, from the users.

2) Focus on top quality products

In China, there are many suppliers which have good connection with state owned companies, who will bring their products all over the world. No worry on sells, no worry on after sales, no worry on warranty etc. All equipment can not work un-properly from the first moment, and in one day or a few month, no one can tell the differecne of top quality ones.

So if a German manufacturer tell you that one of our products' big problem is it last too long time, admire this, as some day we will also proudly tell the same to the world.

Welcome to Visit GN Solids Control in OTC 2016
May 02 2016

Welcome to Visit GN Solids Control in OTC 2016

Hmm, we missed Bauma, a lot of clients are telling us, it is quite a pity, lots of drilling companies wandering there, as there wasn't a good plan, have to take next chance. While we do come to OTC again, with two booth, one for GN Solids Control China, one for GN Solids America.

For OTC 2016, GN still has 2 booths to entertain the clients. Below information will help you to locate GN’s booth.

Event Location: NRG Park, Houston, TX, USA

Event Time: 2-5 May 2016

GN Booth No. 1: Reliant Center 1652-A

GN Booth No. 2: Reliant Arena 9732

GN team is willing to receive the appointments for an visiting to our booth, please let us know by sending to or

What will you see there:

1. Shale Shaker

Shale shaker is a basic but main solids control & drilling waste management equipment, GN have made a lot of modification on the shakers. From our first intension, we wanted to have some sexy equipment, not only good, useful. Which made us quite different from the first moment.

2. Main Waste Management Equipment: Verticle Cuttings Dryer & Decanter Centrifge

Vertical cuttings dryer is used for drilling waste management. GN Vertical cuttings dryer is now the 4th generation after improving based with rich jobsite experience in the past 3-5 years. GN Solids Vertical cuttings dryer now can work stable and high efficient in hard environment, extreme hot area in Algeria and Kuwait, extreme cold area in Russia.

As a leading company, GN is the first Chinese solid scontrol supplier in China who export Chinese verticle cuttings dryer to oversea market.


GNLW363 is the most popular model centrifuge which can be used for different purpose. The 14inch bowl centrifuge is equivalent to USA brand centrifuge, eg. Derrick DE1000 centrifuge or Swaco 518 centrifuge. GNLW363 centrifuge can be used for oil drilling solids control or drilling waste management. The speed can be adjusted by variable speed control panel stepless. This centrifuge can also used for waste water treatment with super high speed 3800RPM.

Competing with international brand, GNLW363 have won a lot of times, with competitive price and equal quality. As we always quoted, Baker Hughes feedback is GN product is same quality & effcient with similar EU / US products. 

2016 MIOGE Oil Show
April 26 2016

Oil Gas Exhibition in Russia 2016

This time it is not a quite famous one in Russia, Since its launch in 1993, it has established itself as a leading event for the Russian energy market. MIOGE is also one of the top ten oil & gas shows in the world.,it is a small local exhibition, but we took the chance, to make more and more Russian clients know more about GN Solids Control. Though we do not have a big booth as we were in Beijing CIPPE, we still take our main equipment there: GNLW363CG decanter centrifuge, GNLW363C 14inch decanter centrifuge, this centrifuge mainly used for solids control for oil & gas drilling, to recover barite or reduce mud weight. This is work as 4th separation of the solids control line., GNZS703E-2S12N mud cleaner, GNCD930C vertical cuttings dryer We only have one model vertical cuttings dryer for drilling waste management. This model vertical dryer has been used for project over 3 years. The stable working performance and reasonable price win lots of clients from our US competitors..

GN Solids Russia is the branch of GN Solids Control in Russia. It's mission is to support GN Solids Control Equipment business in Russia and CIS countries. With the support team in Russia, GN Solids Controlprovide the sales of stock equipment, on-site technical support, and after sales services. This brings the value to the end user of GN Solids Control equipments.

• Exploration & production Equipment

• Onshore & offshore technology

• Oilfield equipment & services

• Drilling & well servicing

• Transportation & pipelines Equipment

• Measurement & automation technology

• Tools & electro-power equipment

• Laboratory equipment

• Software and IT Systems

• Recruiting and training and many others

GN now is ready for OTC 2016 oil show in Houston, USA. GN Solids Control has two booths there to enlarge the brand impact in America and Latin America countries.

OTC Event time: 2-5 May, 2016OT Address: Houston, Texas, USAGN Solids Control China Booth No. : Reliant Center 1652-AGN Solids America Booth No.: Reliant Arena 9732Make an appointment by sending email to:

At OTC 2016 oil exhibition, you can check GN Solids Control equipment by watching the design, touching the production material, checking the working video at jobsite, talking with GN sales and engineer there to deeper the understanding of GN brand and products. We will take the high speed decanter centrifuge (GNLW363C centrifuge) and waste management vertical cuttings dryer (GNCD930C).  All equipment has over 3-5 years jobsite experience as high quality and mature product. GN Solids Control will also take the baby centrifuge for some construction industry, mining or piling.

April 17 2016

Why More Exhibition in Such a Shrinking Time

When you look back, from 2008, GN have made a lot of big steps, as shown in our new presentation, we have suffered or actually taken advantage from the crisis, then we welcome our big days. At that time, GN Solids become the first API certified China Solids Control Company

Then in the following two years, more and more business coming.

Then in 2011, Hebei GN Solids Established, Vertical Cuttings dryer developed

In 2013, GN Solids America Established. GN Passed DNV CE, HSE, Russia CR-TU certification

In 2014, GN Russia branch established, and drilling cuttings solidification unit developed

In 2015, GN China honored to be National High-Tech Solids Control Enterprise

Now, GN Expand to own No. 2 New Factory close to Beijing, Drilling cuttings solidification unit developed

Except the cars have upgraded, as some colleagues told other clients, the client name list also changed, equipment is now using more and more in bigger projects. From some small project, from doubt, from only the brave guy, to be known all over the world, to be accepted by Baker Hughes, Baroid. Also from a small Chinese manufacturer, to be some one who accepted and respected by all the world leading suppliers. After other companies shut down offices, we found something quite exciting, a lot of people worked for / with our respected competitors, now wanna work for / with GN.

In 2016, more exhibitions have actually already been settled, GN will show more of our products all over the world. Except the CIPPE, where is in front of our own door, and we have the biggest booth, showing the world our latest technology, our updated equipment.

OTC Houston

Iran Exhibition

Russian Oil and Gas

OGS in Singapore.

What will be in the exhibitions?

- GNLW363D-VFD Decanter Centrifuge with Telescopic skid

- GNZS706E-HB double deck Shale Shaker

- GNMS-500D desanding plant

- GNZS594G-HB the 7th Generation of GNZS series shale shaker.

- GNZJ594G-2S12N the 7th Generation of GNZJ series mud cleaner.

- GNLW223C 9inch decanter centrifuge

- GNLW363C 14inch decanter centrifuge

- GNLW453C 18inch decanter centrifuge

- GNLW553C 22inch decanter centrifuge

- Jet Mud Mixer with stainless steel mixing hopper

- Screw Conveyors for transfer drilling cuttings.

Keep tune!