GN Solids Control Equipment,Solids Control System

April 12 2021

GN Solid Control has provided thousands of drilling cuttings management systems and solids control systems for global oil and gas companies. More and more offshore drilling companies are using GN Solids Control made drying shakers, decanter centrifuges and cuttings dryers to treat drill cuttings before discharged to the sea.

Last week, GN Solids Control finished manufacturing of one set offshore drilling waste management system for an Asian drilling company. It mainly includes Hi-G drying shaker and vertical cuttings dryer.
1.GN Hi-G Drying Shale Shaker
GN drying shale shaker is mostly used to remove solids larger than 100 microns. GN Solids Control provides linear motion and dual motion shaker. It is running under 8.0 G force, particles in the drilling mud discharged from the shale shaker can be further dried.
GN Solids Control provides the whole product line of shaker screens, not only GN own made shakers that GN can manufacture, GN Solids Control also manufactures replacement screens for world wide famous shaker screens.
To get drier solids, GN Solids Control also provides new technology ViST unit, also called vacuum screen unit to remove fluid from the drilling cuttings.

2.GN Vertical Cuttings Dryer
GN Vertical Cuttings Dryer is especially designed to treat OBM, SBM when the Hi-G shaker is usually used to treat WBM.
GN Solids Control provides 3 types of screen baskets, among them the smallest screen size is 250 microns. Solids larger than 250 microns can be removed, and oil is collected after treated by GN Cuttings Dryer. Oil on the final cuttings can be reduced to 3-5% from 20%.
GN vertical cuttings dryer is controlled by variable speed control box or fix speed control box. It’s easy to operate by VFD box, as the key parameters like rotating speed, differential speed can be adjusted easily on the HMI panel.

GN NEWS

More>>
 

GN Videos

Latest Products

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mixshields  or Shaft Sinking Machines

  • 9 Inch (220) Decanter Centrifuge – Baby Centrifuge

    The 9 Inch Decanter Centrifuge is a baby centrifuge which is the world smallest industry decanter. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • GN Thermal Desorption Unit (TDU)

    GN Thermal Desorption Unit is an ex-situ, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, oil based drilling cuttings, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons.

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force.

  • Coal Screen Scroll Centrifuge

    GNCD930 Vertical Screen Scroll Centrifuge allows you to handle coal from higher fines recovery and maintaining the lowest product discharge moistures possible. The GNCD930 Coal Screen Scroll Centrifuge is designed for fine coal drying with significantly high capacity per energy unit.

  • Explosion Proof Control Panels

    GN Explosion proof electrical control panels or electrical control stations are used in hazardous Location. The Ex control panel is designed and built to operate in environments where concentrations of flammable gases, vapors, liquids or combustible particles pose risks of ignition and explosion.

  • Explosion Proof Junction Box

    GN Explosion Proof Junction Box is optional in ATEX approval, IEC Ex approval, and CN Ex Approval for Zone 1 or Zone 2, class I division 1 and division 2 hazardous locations.

  • Explosion Proof Motor Starters

    GN Solids Control explosionproof motor startersare rugged and compact complete system and are Europe ATEX and International IEC Ex as well as China National CN Ex certified for use in Zone 1 or Zone 2 areas where motor circuit protection is required.

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps