GN Solids Control Equipment,Solids Control System

March 07 2021

GN Solids Control is a China based manufacturer, GN has 3 manufacturing plants in China, 1 USA branch company and 1 Russian branch company. GN Solids Control made solids control equipment and drilling waste management systems are widely used accepted by global drilling contractors.
Last week, GN Solids Control finished manufacturing of one set drilling cuttings dryer and one decanter centrifuge for an international drilling company.

1.GN Drilling Cuttings Dryer
GN Solids Control made drilling cuttings dryer is mainly used to treat oil based cuttings, synthesized base cuttings. After treating by GN drilling cuttings dryer, oil on the final cuttings can be control to less than 5 %.
GN Cuttings Dryer mainly includes screen basket and inside flight, these two main components are running in the same direction by at different speeds. Most of those particles larger than 250 microns can be remove from the cuttings. GN Solids Control made cuttings dryer can be fixed with 3 different sizes of screen baskets, include 250 microns, 350 microns and 500 microns. Flights and screen basket is pretty close, only 1 mm distance.
GN Solids Control has provided hundreds of drilling cuttings dyers to global companies, such as Baker Hughes, Shell etc. GN made cuttings dryer can be equipped with VFD control box, all main parameters are easily adjusted from the HMI touch screen.

2.GN Decanter Centrifuge
Decanter centrifuge is one of the key treating components in drilling mud solids control and drilling waste management. GN Solids control manufactures different rotating bowl sizes that suit for different treating capacity demands.
As for this drilling company, GN Solids Control provided one set 14 inch bowl centrifuge. Same with GN Cuttings Dryer, GN decanter centrifuge is easy to operate as the main working parameters can be adjusted easily in GN centrifuge’s VFD box.
In order to use for a long life consider the weariness, GN centrifuge rotating bowl is made of duplex stainless stell 2305 or 2204. And all the solids discharged port are protected by tungsten inserts. Even the inside screw propeller is fixed with tungsten carbide tiles.

GN NEWS

More>>
 

GN Videos

Latest Products

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps

  • Liquid Mud Plant

    GN Solids Control design and manufacture different size of liquid mud plant according to your need. We can design and build both vertical tanks, rectangular tank ,round tanks etc. depends on your space and requirements

  • Dredge Slurry Dewatering System

    Dredge Slurry dewatering system is dredge slurry separation system consist of shale shaker, desander, desilter or decanter centrifuge for 3 to 6 stage separation depending on the needs

  • TBM Slurry Separation Plant

    An efficient TBM slurry separation plant is the basis for the successful use of slurry-supported tunnel boring machines(TBM). The GN Slurry separation plant is popular for project of AVN Machines , Mixshields  or Shaft Sinking Machines

  • 9 Inch (220) Decanter Centrifuge – Baby Centrifuge

    The 9 Inch Decanter Centrifuge is a baby centrifuge which is the world smallest industry decanter. The bowl of the centrifuge is 9 inch (220mm). As the compact design, it’s popular for client to use it in small capacity or limited space application for solids and liquid separation

  • GN Thermal Desorption Unit (TDU)

    GN Thermal Desorption Unit is an ex-situ, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, oil based drilling cuttings, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons.

  • 14 Inch (360) Decanter Centrifuge – High Speed Centrifuge

    The GN 14 inch (360mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.5:1 with high speed up to 4000 RPM. The centrifugally casted duplex stainless steel bowl and the tungsten carbide hardened tiles on the solids conveyor maximize the GNLW363 centrifuges operational service life between overhauls.

  • 18 Inch (450) Decanter Centrifuge – High Performance Centrifuge

    The GN 18 inch (450mm) diameter bowl decanter centrifuge which has a length over diameter ratio of 3.4:1 or 4:1 for removal of low gravity solids from the liquid at reduced operating costs. The centrifuge is fitted with a 75 hp main drive and a 30 hp back-drive at one end.

  • 22 Inch (550) Decanter Centrifuge – High Capacity Centrifuge

    The GN 22 inch (550mm) bowl diameter decanter centrifuge is a high capacity centrifuge. GN 22inch centrifuge is optional in bowl length and diameter ration of 3.3:1 or 4.2:1. This Fully Variable Speed VFD controlled unit is built using the most reliable and robust electrical components

  • 30 Inch (760) Decanter Centrifuge – Big Bowl Centrifuge

    The GN 30 inch (760mm) bowl diameter decanter centrifuge is a big bowl centrifuge. GN 30inch centrifuge is with bowl length and diameter ration of 4.2:1. This bowl size allows client to handle big volume fluids with one single unit.

  • 3 Phase Decanter Centrifuge

    GN 3 phase decanter centrifuge is used to separate two liquid phases from one solid phase at the same time. As is known, decant centrifuge principle of separation is by G force.

  • Coal Screen Scroll Centrifuge

    GNCD930 Vertical Screen Scroll Centrifuge allows you to handle coal from higher fines recovery and maintaining the lowest product discharge moistures possible. The GNCD930 Coal Screen Scroll Centrifuge is designed for fine coal drying with significantly high capacity per energy unit.

  • Explosion Proof Control Panels

    GN Explosion proof electrical control panels or electrical control stations are used in hazardous Location. The Ex control panel is designed and built to operate in environments where concentrations of flammable gases, vapors, liquids or combustible particles pose risks of ignition and explosion.

  • Explosion Proof Junction Box

    GN Explosion Proof Junction Box is optional in ATEX approval, IEC Ex approval, and CN Ex Approval for Zone 1 or Zone 2, class I division 1 and division 2 hazardous locations.

  • Explosion Proof Motor Starters

    GN Solids Control explosionproof motor startersare rugged and compact complete system and are Europe ATEX and International IEC Ex as well as China National CN Ex certified for use in Zone 1 or Zone 2 areas where motor circuit protection is required.

  • Explosion Proof Pressurized VFD Control Panels

    GN Explosion Proof Pressurized Control Panel is popular used for VFD controland soft starter of motor, especially in high temperature ambient. The explosion proof pressurized control panel consists of main cavity and auxiliary cavity.

  • Solids Removal Unit for Mining Industry

    GN Compact Solids Removal Unit (SRU) is used for drilling fluids solids control for the small mining rigs to do diamond drilling. Instead of using traditional drilling sumps